Standard
Roof Rack Mount

The Standard Roof Rack Mount is designed to attach to varying vehicle roof racks, ranging in thickness from 15 mm (0.59 in) to 44.5 mm (1.75 in), with a maximum width of 95 mm (3.74 in) or roof racks with compatible t-slots. Use your Standard on-the-go, and easily remove your Standard from the Roof Rack Mount when not in use.

Compatibility: Starlink Standard
Kit Contents: Roof Rack Mount Base, Grip
Pad, 4x Screws, Allen Key, Screwdriver
Recommended Tools: None
Package Dimensions: 228.5 x 321.5 x 77 mm (9 x 12.7 x 3 in)
Package Weight: 1.6 kg (3.5 lbs)

BDT 8,300.00

Standard to Standard
Actuated Mount Adapter

The Starlink Standard to Standard Actuated Mount Adapter is designed to attach to an existing mount for Standard Actuated kit, without needing to replace the mount. It is recommended primarily for customers who have an existing mount installed for the standard actuated kit, but need to replace or install the newer Standard kit.
The Standard to Standard Actuated Mount Adapter is engineered for easy permanent installation and is accompanied by all necessary hardware including a mast, and user-friendly instructions, ensuring a hassle-free setup process.
For customers buying a new Standard kit and looking for a new mount (i.e. who do not have standard actuated mount installed or do not want to reuse it), we recommend buying a mount designed for the Standard kit, instead of this adapter mount.

Compatibility: Starlink Standard Actuated
Mounts: Short Wall Mount, Long Wall Mount, Pivot Mount, Ground Pole Mount, Ridgeline Mount
Kit Contents: Pipe Adapter Mount, Mast Tube, Allen Key
Recommended Tools: None
Package Dimensions: 363 x 236 x 113 mm (14.3 x 9.3 x 4.4 in)
Package Weight: 1.4 kg (3.1 bs)

BDT3,200.00

Note: This kit does not include Wall Mount

Standard
X-Frame Base

The Standard X-frame Base is designed to support a ground level installation or a quick setup. Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions.
The Standard X-Frame Base is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Compatibility: Starlink Standard
Kit Contents: X-Frame Base, Mast Adapter, Mast
Recommended Tools: None
Package Dimensions: 380 x 640 x 145 mm
Package Weight: 2.9 kg (6.4 lbs)

BDT6,200.00

Ridgeline Mount

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs. With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility: Standard Starlink
Tools Needed: None
Mount Package Dimensions: 29.8” x 25.8″ x 4.0” / 75.6 x 65.6 x 10.1 cm
Mount Package Weight: 12.8 lbs / 5.8 kg
Ballast Package Dimensions: 16.7” x 4.9” x 7.4” / 42.4 x 12.4 x 18.9 cm
Ballast Package Weight: 55.8 lbs / 25.3 kg

BDT32,000.00

Gen 3 Router Mount

The Router Mount is designed to mount the Gen 3 Router directly to a wall or other surface. It is ideal for home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Router Mount is installed, the Gen 3 Router is easily snapped into place and cable retention ensures the cables are not accidentally pulled out.

Compatibility: Starlink Gen 3 Router
Recommended Tools: Drill, Marker, #2 Phillips Screwdriver, 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)
Package Dimensions: 25 x 16.5 x 8.5 cm / 9.8″ x 6.5″ x 3.3″
Package Weight: 0.34 kg (0.75 lbs)

BDT4,300.00

Standard Mobility Mount

The Mobility Mount is designed to create a waterproof seal and protect against water ingress when permanently mounting to wood, fiberglass, metal, plastic and slotted rails on vehicle racks. The Mobility Mount features stainless steel fasteners, which are corrosion resistant to support harsh environments. This durable and versatile mount also supports an 8 degree mounting angle to maintain a signal during extreme and wet weather conditions.

Compatibility: Standard Starlink
Tools Needed: Drill, 5 mm (3/16 in) drill bit, 9 mm (3/8 in) drill bit, 14 mm wrench, 13 mm wrench, pen
Package Dimensions: 185.5 x 249.9 x 86 mm / 7.3” x 9.8″ x 3.4”
Package Weight: 880 g / 1.94 lbs

BDT2,800.00

Standard Power
Supply Mount

The Power Supply Mount is designed to mount the power supply directly to a wall or other surface. It is ideal for your home or office use when no desk space is available, or for mobility applications where space efficiency is paramount. Once the Power Supply Mount is installed, the power supply is easily snapped into place and cable retention ensures the input power cable is not accidentally pulled out.

Compatibility: Starlink Standard Power Supply
Recommended Tools: Drill, Marker, #2 Phillips Screwdriver, 4 mm (5/32 in) Drill bit (no anchors) or 7 mm (9/32 in) Drill bit (wall anchors)
Package Dimensions: 25 x 16.5 x 8.5 cm / 9.8″ x 6.5″ x 3.3″
Package Weight: 0.34 kg (0.75 lbs)

BDT1,000.00

Standard Starlink Cable
15m

The 15 m (49 ft) Starlink Cable is designed to replace the Standard 15m Cable from the Starlink Kit in case of damage or if you need an extra cable outside of your permanent installation.

Compatibility: Standard Starlink Kit
Package Dimensions: 135 x 50 x 360 mm ( 5.3 x 2 x 14.2 in)
Package Weight: 1 kg (2.2 lbs)

BDT4,000.00

Standard Starlink Cable
45m

The 45 m (147 ft) Starlink Cable is designed to replace the Standard 15m Cable from the Starlink Kit when additional length is needed between your install location and the router.

Compatibility: Standard Starlink Kit
Package Dimensions: 89 x 311 x 324 mm (3.5 x 12.3x 12.76 in)
Package Weight: 2.9 kg (6.39 lbs)

BDT 11,000.00

Standard Pivot Mount

Ideal for installation on slanted, shingled roofs. The Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions, thus maximizing the performance of your Starlink.

BDT6,700.00

Standard Wall Mount

Designed for installation on an exterior wall near the top of the gable or fascia. This wall mount can accommodate a 4” overhang maximum and offers a secure, long-reaching platform to optimize the placement of your Starlink for the best connectivity and performance.

Compatibility: Standard Starlink
Kit Contents: Wall Mount, 2x Lag Screws, Silicone Sealant, 40x Wall Clips
Tools Needed: Drill, Stud / Electrical Finder, Socket Wrench, Level, 1/4″ (6 mm) Drill Bit, 9/16″ (14.2mm) Socket, Pencil
Package Dimensions: 11.1″ x 18.5″ x 4.1″ / 280 x 470 x 105 cm
Package Weight: 3.5 lbs / 1.6 kg

BDT5,900.00

Standard Pipe Adapter

The Starlink Standard Pipe Adapter is designed to attach to any existing pole with a minimum diameter of 31 mm (1.25 in) and a maximum diameter of 63.5 mm (2.5 in). This adaptable and sturdy mount allows seamless installation onto a variety of pole sizes, offering flexibility and ease in positioning your Starlink for optimal performance. Crafted from durable, weather-resistant materials, the mount can ensure a sturdy and enduring foundation for your Starlink, capable of withstanding various environmental conditions. The Starlink Pipe Adapter is engineered for easy installation and is accompanied by all necessary hardware and user-friendly instructions, ensuring a hassle-free setup process.

Note: Pipe not included. Only intended to be used with metal pipes; not PVC and plastic pipes.

Compatibility: Starlink Standard
Kit Contents: Pipe Adapter, Allen Key, 20x Routing Clips
Recommended Tools: None
Package Dimensions: 250 x 179 x 113 mm (9.8 x 7.0 x 4.4 in)
Package Weight: 0.971 kg (2.14 lbs)

BDT2,600.00

Gen 3 Mesh Router
Standard | Mini

The Gen 3 Router offers our best Wi-Fi experience, featuring the latest Wi-Fi 6 technology and three separate bands for data transmission. This powerful router delivers exceptionally fast speeds, handling multiple devices with ease, and ensuring uninterrupted streaming, gaming, and browsing throughout your home. With a coverage area around 2000 square feet (185 square meters) per router**, you can enjoy fast and reliable connectivity.

Compatibility: Gen 2 Router, Gen 3 Router, Router Mini, and Starlink Mini Kit. Not compatible with 3rd party mesh systems.

Important Note: For best performance, use a wired connection for your router.
If connecting to your Starlink Mini Kit, use a Standard Starlink Cable. Wired connection to a Gen 2 router requires the Starlink Ethernet Adapter.

Ethernet Ports: Two (2) Latching Ethernet LAN ports with removable cover
Product Dimensions: 2.4” x 11.8” x 4.7” / 55 x 300 x 120 mm
Package Dimensions: 14.25” x 6” x 4” / 361 x 154 x 101 mm
Package Weight: 6 lbs / 2.7 kg

BDT15,000.00

Masonry
Routing Kit

Designed for drilling through masonry, concrete or hard coat stucco (excluding EIFS) walls. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bits, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Hammer, Hammer Drill, Phillips Head Drill Bit, Stud / Electrical Finder, Goggles, Gloves, and Mask
Package Dimensions: 13.875” x 6.5” x 1.75” / 35.2 x 16.5 x 4.4 cm
Package Weight: 2.1 lbs / 1 kg

BDT1,800.00

Cable
Routing Kit

Designed for drilling through most walls. Not recommended for masonry, concrete, or hard coat stucco. Best for customers with prior internet cable routing experience and installation; must be comfortable drilling through walls. Kit includes a 3/4″ (1.9 cm) spade bit, drill bit, cable routing tool, silicone sealant, grommets, and wall clips.

Tools Needed: Drill, Stud / Electrical Finder
Package Dimensions: 3.75″ x 5.25″ x 1.75″ / 34.9 x 13.3 x 4.4 cm
Package Weight: 0.83 lbs / 0.38 kg

BDT960.00

**Based on customer surveys. Home construction, layout, and router placement can increase or decrease range. Homes with stone, concrete walls, or long layouts may require additional routers for full coverage.

All prices exclude shipping and handling fees